Travel: X 65.35″, Y 30.00″, Z 26.00″; 25hp, 12,000 RPM Spindle; 24 Tool Changer. Fixed Table, Traveling Column Design allows easy access to the table and work pieces. Center partition will provide (2) separate work zones or can be removed to allow a single large workspace. Coolant thru spindle.
Travel: X 41.31″, Y 20.08″, Z 20.08″; 25hp, 12,000 RPM Spindle; 30 Tool Changer. This new machine will change tools in 2.9 seconds. Rapid travel 1417 IPM. Coolant thru spindle. 4th Axis Capabilities.
15″ Chuck Machining Capacity: 16.53″ OD x 63″ lg., 40 HP, Up to 26″ Swing. 4.4″ bore diameter, 3,300 RPM Spindle. Drive system has Integral Spindle Motor Headstock, (no belts or pulleys), for powerful torque and constant horse power. This also gives improved surface finish and better roundness. 12 position drum turret. Automatic tool eye.
12″ Chuck Machining Capacity: 16.53″ OD x 48″ max. lg.,40 HP, Up to 26″ Swing. 4.4″ bore diameter, 3,300 RPM Spindle. Drive system has Integral Spindle Motor Headstock, (no belts or pulleys), for powerful torque and constant horse power. This also gives improved surface finish and better roundness. 12 position drum turret. Automatic tool eye.
8″ Chuck Machining Capacity: 14″ OD x 21″ lg. 35 HP, 24″ Swing. 2.2″ bore diameter, 5,000 RPM Spindle. Drive system has Integral Spindle Motor Headstock, (no belts or pulleys), for powerful torque and constant horse power. This also gives improved surface finish and better roundness. 12 positon drum turret. Automatic tool eye.
Max. Workpiece dimensions: 41.34″ x 31.50″ x 11.61″. Machining Range: 19.69″ x 13.77″ x 11.81″ lg., 15 deg. taper. Submerged machining, Automatic Fluid Level Control, Digital 500 Watt AC Servo Drive. 2005 Model, top of the line Wire EDM for the fastest, most intricate custs.
Electrical Discharge Machining with a large workpiece capacity of 500 pounds. Programmable orbiting/vectoring head with .400″ travel in U- and V-axes. Orbiting/vectoring feature reduces electrode requirements and finishing time – separate roughing and finishing electrode sizes are not required.
X= 40.00 Y= 63.00 Z= 24.00 (Height from table to probe tip)
Accuracy to within: 1.9 Micrometers, or .00007″ over a 300mm/11.8 inches range of measurement.
Accuracy to within: 3.8 Micrometers, or .00014″ over a 600mm/23.6″ range of measurement.
CMM comes with Autor Probe Changer
Advanced Digital Rockwell Hardness Tester.
- – Horizontal Protrudent Indenter Design, suitable also for internal and external testing
- – Testing on surfaces difficult to reach
- – Testing internal surface of rings and tubes with diameters over 23mm
- – Testing external surface of round bars with diameters over 3mm
- – Rockwell A,B,C,D,E,F,G,H,K,L,M,P,R,S,V (15 Scales in total)
20 watt laser has a 6″ sq. window (marking space). Cabinet enclosure of 24″ x 48″. Rotary indexer which can mark up to a 3″ diameter part. Cut depth of .001 – .005 in any metalic material.
20-1/8″ Swing over bed. 80″ between centers. 3-1/8″ Spindle Bore. Steady Rest. 10 HP, 20-1500 RPM. Standard and Metric threading. Digital readout on X & Y travel. Coolant system.
14″ Swing over bed. 40″ between centers. 1-9/16″ Spindle Bore. Steady Rest. 3 HP, 65-2000 RPM. Standard and Metric threading. Coolant system.
Table Size: 10″ x 54″. 5HP Baldor Super “E” Motor, 50-3750 RPM, NST 40 Spindle taper. US made Allen & Bradley Electrical Components. Digital Readout on X & Y travel. Power feed on 3-Axis. Coolant System.
Travel: 14″ x 24-1/2″. 5HP (V3), 1750 RPM/60HZ, 3-Axis auto movement. Table speed 16-80 FPM. Auto. Increment down feed .0001″ to .001″.
Key ways broached from 1/8″ to 1-1/4″ wide.
- – 1/8 to 3/16 – 5-1/2″ Max. Length of keyway (1/2″ cutter bar)
- – 3/16 to 1/2 – 5-1/2″ Max. Length of keyway (3/4″ cutter bar)
- – 1/2 to 1-1/4 – 9″ Max. Length of keyway (1-1/4″ cutter bar)
13″-48″ Distance column to spindle. 35″ Travel to spindle head. Distance spindle to base: 19.4″-54″. Spindle (rpm range x steps): 44-1500 x 12. Main motor: 5 HP.
Table: 26″ x 26″, Table tilt to 45 degrees. AC Drive Motor. 2HP Mist Coolant System. Max. Work Height: 13″. Throat band to column: 20″. Variable band speed: 55 to 5200 FPM.
Capacity: 10″ x 16″ LG. Drive Motor: 2HP, 105-275 FPM. Angle sawing 45 to 90 degrees. Pneumatic head raise. Pneumatic operated vise. Coolant system.
Capacity: 16″ High x 22″ Flat @ 90 Deg., 16″ High x 15″ Flat @ 45 Deg. left miter in one direction only. Blade size: 1-1/4″. Motor: 7.5 HP. Full programable CNC control.
Cabinet Size 26″ Wide x 44″ Long x 30″ High
5 cubic ft tub capacity. Tub Size 18″ x 20″ x 34.5″. Heavy-Duty machine designed for industrial use. Overhead drive with 2HP motor.
Chamber Size: 12″ High X 14″ Wide X 24″ Deep.
Max Temp: 2,200 Degrees
East Tech Company heat treats to the guide lines set forth in ASM practices as outlined in East Tech procedures. We can heat treat Irons, Steels and Nonferrous Alloys